HELPLINE 0861 40 41 42 • www.spacetv.co.za
MOD-HDMI-Q : Operation Manual 1v0
3.5 INSTALLATION
The MOD-HDMI-Q can be programmed with one of the following ways:
• From the front panel display
• From the USB interface
3.3.1 Installation using the Front panel display:
The user is able to install very quick and easy multiple MOD-HDMI-Qs using the SSD
+ Button interface of the front panel of the device, following the steps below:
STEP 1:
Power up the MOD-HDMI-Q by adding the external power supply. The MOD-HDMI-Q
will need 40-50secs to initialize itself. The SSD (Seven Segment Display – No 2 / Figure
No1 ) depicts the initialization status.
STEP 2:
Choose a modulator by pressing the MOD Select button (No 5 / Figure No.1). The LED
display will turn on depending on the modulator that is selected.
Step 3:
Choose
“Channel mode”
by pressing the Channel/Profile button (No 1 / Figure No.1 )
The “Channel LED” will lit indicating that “Channel” selection mode is selected.
Step 4:
Choose
“Attenuation mode”
by pressing the Channel/Profile button (No 1 / Figure
No.1 ) The “Attenuation LED” will lit indicating that “Attenuation” selection mode is
selected.
Step 5:
Choose
“Profile mode”
by pressing the Channel/Profile button (No 1 / Figure No.1 )
The “Profile LED” will lit indicating that “Profile” selection mode is selected.
Step 6:
Repeat the procedure from step Νο 2 up to step Νο 5 for the rest of the modulators
of the MOD-HDMI-Q.
HOW PROFILES WORKS
In an installation all the modulators (or Mux in general) need to have different values of
the following fields to avoid conflicts in the automated scan of the TV sets:
Program Name Service ID TS ID
For that reason, the user must always selects a different Profile number in every modulator
starting from Number #1.
