Spa Electrics Retro Universal Series, Инструкция по установке и эксплуатации

Страница: 24 / 28

Light flashes
red
Light over heating
Light returns to WHITE
colour during manual
colour change.
Refer to MultiPlus User Guide
instructions.
Light synchronization
process has been
triggered.
If these issues cannot be resolved with the above recommended actions,
please contact your local Spa Electrics reseller or Spa Electrics directly.
Check light is fully submerged.
Check vents are not obstructed
Light not operating (1) Faulty connection
to transformer
Ensure cable correctly connected
to transformer terminals
Light not operating (3) Damaged cable
Light not operating (2) Mains power not
connected
Check transformer is plugged in
to GPO and switched on
Light not operating (4) Transformer not
working
Check fuses & test transformer
using multimeter under load
(ie.20w 12v)
Light not operating (5) Damage caused by
high voltage and/or
incorrect power supply.
Return product to your local
Spa Electrics reseller or
Spa Electrics for repair
Light colours not
synchronized with
controller
Incorrect operating
mode selected.
Refer to MULTI PLUS setup
procedure
Disconnect plug top and test
voltage under load using
multi-meter (ie. 20w 12v)
Required voltage (11v ~ 13.5v)
ISSUE REASON ACTION
TROUBLESHOOTING
23