8
UV Fixed Mode: - Stationary use to sterilize a surface for 15
min
To Activate “Fixed Mode”
double press the power switch for UV Operation For safety
reasons there is a three second delay between activating fixed mode and the UV-C rays
coming on.
For added safety, there is also a motion sensor which deactivates the UV rays whenever
movement is detected. For visual confirmation when in fixed mode, the UVC and AUTO
indicator lamps (on rear of unit) will stay on continuously.
Pushing the UV switch again, will turn the UV function off.
Work light Mode:
Used for normal lighting requirements, in the work place, home,
outdoors, hiking, camping fishing etc. Note: Turning the work light on automatically turns
the UV light off, both cannot be on at the same time.
To Activate “Work Light Mode”:
Press the
power switch once, for white light and
the unit can be used as a normal work light. Press the power switch again to turn off.
UV-C Test Mode:
Used to turn on UV-C emitters only (without any visible light). Test mode
is used to test the operation of the UV-C emitters. Entre test mode and hold the lens close
to the test card, If the words “
UV-C LIGHT
” become visible on the test card you have
confirmed that the UV-C emitters are working.
To Activate “Test Mode”:
Press and hold the UV button in, after 2 seconds the UV-C
emitters will turn on, now only invisible UV-C light is coming out of the lens - for as long as
you hold the UV button in. Once you stop pressing the UV button the emitters turn off.
Battery charger indicator
The battery charger indicator is located on the back of the lamp and consists of a color
change LED.
Charging Mode:
Green LED flashing when charging, Green LED on when charged.
Charge Level:
Green
＞
90%, Yellow: 89%-16%, Red
＜
15%.
