5
Multi-function on/dimmer/off switch.
To turn the light on push the multi-function switch once.
(This will give you 1000lm & up to 3hrs of burn time)
Pushing the multi-function switch a second time will dim the light by half.
(This will give you 500lm & up to 6hrs of burn time)
Pushing the multi-function switch the third time will turn the light off.
Capacity indicator /charge control indicator
The capacity indicator is located on the side of the lamp and consists of 4 LEDs. These
indicate the actual capacity. When the remaining capacity is low the indicator will show 1
red light.
Charging process
The micro USB charging socket is located on the side of the handle below the rubberized
protective cover. Pull the water-resistant cover off to expose the micro USB port. Plug the
micro USB cable into the light and the USB end into an appropriate USB port (e.g.
Computer / Phone Charger). The charging process is symbolized by a flashing green LED
on the charge control indicator. When fully charged, all 4 LEDs light up.
Maintenance
After longer periods out of use the battery must be fully charged
Incorrect or defective replacement parts can lead to damage.
*Warning*
The lamp must not be switched on whilst being charged.
Disposal & Recycling Information
When the tool reaches its end of life, take it to a collection point designated by local
Authorities for E-wast.
The separate collection and recycling of your product at the time of disposal will help
conserve natural resources and ensure that it is recycled in a manner that protects human,
heath and the environment.
Multi-Function On/Dimmer/Off Switch