SP Scientific FTS SYSTEMS LYO-SEA, Руководство оператора

Страница: 17 / 20

FTS Systems Lyo-SEA for VirTis Genesis Operation
Rev 002, 04/11 9
© SP Scientific 2011
Shelf Spacing
Certain applications of the Lyo-SEA sample thief may require shelf spacing
adjustments.
To adjust shelf spacing:
Ensure that all shelves are empty before continuing. 1.
Press and hold the stoppering switch in the Down position to allow the shelf 2.
stack to compress fully.
Remove the four (4) upper shoulder screws and install latching rod 3.
extensions. Remove only the upper shoulder screws installed in the four
corners of the top shelf.
Replace and secure the four (4) upper shoulder screws. 4.
Press and hold the stoppering switch in the Up position to allow the shelf 5.
stack to extend and return to its original position. The second product shelf
(now located near the bottom of the chamber) may be loaded with product.
Insert a corrugated shelf spacer on the first product shelf to ensure sufficient 6.
cylinder stroke to stopper the vials.
To return the shelves to their original configuration, repeat the process and 7.
remove the latching rod extensions. Ensure that the shoulder screws are
secured before extending the shelf stack.
Note: The top shelf is the radiant heat shelf and is not appropriate for product. The
shelf below the top shelf is the first "product" shelf, while the shelf below that is the
second "product" shelf, and so on. If the Lyo-SEA sample thief is retrofitted to an
existing Genesis unit, the four (4) latching rods will have to be installed on the first
product shelf. Latching rods are included in the accommodation kit.