1. Please read the users guide before proceeding with your
installations. Serious damage may occur if the procedure is
not followed properly.
2. Remove AC power before installing memory modules. (This
means unplug the power cord in the power outlet) Failure to do
so will damage your memory module.
3. Please make sure that your memory modules are inserted
correctly. They can go in only one way, and should fit
completely in the socket without sticking out.
4. If you have a Pentium 4 motherboard, you need to use an
ATX12V power supply (power supply for Pentium 4 system) is
required for the system to operate normally. (preferably 350
watts for minimal loading or 400 watts for fully loaded
system)
5. If you have any problem getting your system to work, please
follow the troubleshooting tips in your user manual.
6. On some mainboards, the actual chipset cooler may differ from
the chipset cooler as shown on the picture or on the box.
However, the chipset fan on the mainboard is of the same
quality and will work just as well as the one shown in the
picture. (The chipset cooler is as sufficient as the chipset fan
based on different design.)
7. For immediate Technical questions, please visit SOYO tech
support link at
http://www.soyousa.com/support
and
http://www.soyousa.com/kb
.
