Hardware Setup
SY-6IZM/3
27
Step 14. Power Button Enable (JP8)
Your system can be power on by either pressing a power button or
typing in a password, which can be set in the BIOS SOYO COMBO
Setup. To avoid being unable to power up the system due to of
forgetting the password, you can place a jumper cap to short JP8.
This will always enable the Power Button.
Power Button
Enable
Power Button always
enabled
Power Button
according to BIOS
setting
JP8 Setting
Short pin to
always enable
the Power
Button.
Open pin for a
Power Button
function
according to the
BIOS setting.
Step 15. External Suspend Button (JP10)
Some cases come with a suspend button, insert the plug into JP10.
In addition to through this button, the system can also enter the
suspend mode through your OS.
Note:
Suspend mode only functions if your Power Management
mode is APM. Make sure that the BIOS setting for Power
Management is APM. Windows 98 can be installed with ACPI Power
Management (default is APM), in this case suspend mode will not
function either.
