Hardware Setup
SY-6ILA
20
Step 13. Power-On by Keyboard Jumper (JP1)
You can choose to enable the Power-On by Keyboard function by
shorting pin 2-3 on jumper JP1, otherwise, short pin 1-2 to disable
this function.
Power-On by
Keyboard
Disable
Enable
JP1 Setting
Short pin 1-2 to disable
the Power-On by
Keyboard function.
Short pin 2-3 to enable
the Power-On by
Keyboard function.
Note: When using the Power-On by Keyboard function, please
make sure the ATX power supply can take at least 720mA load on
the 5V Standby lead (5VSB) to meet the standard ATX specification.
Step 14. External Suspend Button (JP2)
Some cases come with a suspend button, insert the plug into JP2. In
addition to through this button, the system can also enter the
suspend mode through your OS.
Note: Suspend mode only functions if your Power
Management mode is APM. Make sure that the BIOS setting
for Power Management is APM. Windows 98 can be installed
with ACPI Power Management (default is APM), in this case
suspend mode will not function either.
2
1
3
2
1
3
All manuals and user guides at all-guides.com
