PREPARATION
Using the Remote Control
Cautions regarding use of the remote control
Do not expose the remote control to shock.
In addition, do not expose the remote control to liquid, and do not place in an area with high
humidity.
Do not install or place the remote control under direct sunlight. The heat may cause deformation
of the unit.
The remote control may not work properly if the remote control sensor window of the main unit is
under direct sunlight or strong lighting. In such case, change the angle of the lighting or PDP
TV set, or operate the remote control closer to the remote control sensor window.
Installing the Batteries
Before using the PDP TV set for the first time, insert 2 "AAA" size batteries into the remote control
(supplied). When the batteries become depleted and the remote control fails to operate, replace
the batteries with new (AAA size) batteries.
Cautions regarding batteries
Improper use of batteries can result in chemical leakage and/or explosion. Be sure to follow the
instructions below:
Insert batteries with their terminals corresponding to the (+) and (-) as indicated in the compartment.
Different types of batteries have different characteristics. Do not mix batteries of different types.
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries
and/or cause the old battery to leak .
Remove batteries when they become weak. Chemicals that leak from batteries can cause a rash.
If chemical leakage is found, wipe clean with cloth.
The batteries supplied with the product may have a shorter life expectancy due to storage
conditions.
If the remote control will not be used for an extended period of time, remove the batteries from the
remote control.
Caution!
8
Power on LED
Use the remote control by pointing it towards the remote control sensor window on the main unit.
Objects between the remote control and sensor window may prevent proper operation.
E
N
G
L
IS
H
1. Press cover edge & pull it to
open the battery cover.
3. Press the battery cover
down.
2. Insert both batteries noting
the polarity markings.
OK
MUTE
MTS
POWER
BRIGHT
ZOOM
VOL
CH
1
2
3
4
5
6
7
8
9
0
DISPLA
Y
YPbPr
SCREEN
SIZE
SWAP
PIP ON
-
SLEEP
RECAL
L
MENU
ENTER
EXIT
SOURC
E
MULTI-P
IP
FREEZE
PARENT
AL
CC
