SOYO G668 Ethernet IP Phone User Guide
-9-
Installation within a Home or Office Network
Broadband
Modem
1. Connect one end of the Ethernet RJ-45 cable to an open Ethernet LAN
port on your router, and connect the other end of the cable to one of the
RJ-45 ports (either one) at the rear of the G668 IP phone.
2. Using another RJ-45 cable, you can connect one end of the Ethernet
RJ-45 cable to your computer, and connect the other end to the other
RJ-45 port at the rear of the G668 IP phone. (This is an optional step. IP
phone can work without the computer)
3. Connect the power adapter to the AC outlet and the power jack at the rear
of G668 IP phone.
4. Once the IP Phone is powered up, the booting sequence will begin. You
will see the following information displayed on the LCD screen:
Booting …
È
DHCP
Connecting …
È
Ready For Calls
SOYO, Inc. V1.22
LAN2
LAN1
Computer 1
WAN
Computer 2
IP Phone
Router
LAN
Computer
(Optional)
