Soyer SRM EcoWeld BMK-20i, Руководство по эксплуатации

Страница: 69 / 80

Operating instructions BMK-20i | Heinz Soyer Bolzenschweißtechnik 69
12 Welding operation
The following describes how weldings are carried out and how possible welding errors
can be avoided.
12.1 Carrying out welding
The following describes how weldings are carried out with a stud welding gun.
Danger from incorrect operation
During stud welding, incorrect operation of the devices may cause many dangers.

Before using the stud welding device, refer to chapter
“2 Important safety
instructions
” from page 10.

If you have any problems understanding the operating instructions, contact
the manufacturer, Soyer.

Before each use, check that the devices and the cables/lines with the plugs
are undamaged.
Carrying out welding
When working with the stud welding device, we recommend wearing personal
protective equipment.
See chapter
“2.4 Personal protective equipment“ on page 15.
Step 1:
Before welding, please refer to chapter
“2
Important
safety
instructions
” on page 10.
Step 2:
Connect the gun to the stud welding device (see chapter
“10.2
Connection of the stud welding device and the stud welding guns
” on
page 56).
Check if a connection adapter may be required.
Step 3:
Insert the appropriate stud chuck and a welding stud (see chapter
“7
Description of stud chuck
” on page 29).
Only use SOYER
®
welding studs.
Step 4: Check the welding parameters (see chapter
“11 Settings” on page 61).