18
Operating instructions BMK-20i | Heinz Soyer Bolzenschweißtechnik
Trained electrotechnical personnel
In general: Work on live elements may only be performed by authorised electricians.
This work must be performed in line with the applicable technical rules for
electrotechnical devices.
All devices of Soyer Bolzenschweißtechnik GmbH must only be opened by
SOYER
®
personnel or personnel authorised by SOYER
®
.
3 Transport
When transporting the device, make sure it cannot be damaged. Use appropriate
packaging to protect the device against weathering effects, especially moisture.
Danger during transport
The device is equipped with a handle and carrying strap on the top. The handle and
carrying strap are intended exclusively for transport by hand. Never pull ropes
through the handle or carrying strap to lift the stud welding device by means of a
crane to the installation site. The welding device would become instable and might
tilt from its original position. As a result the handle or carrying strap could rip and the
unit could fall to the ground.
4 Storage, shutdown
During storage or shutdown, make sure to protect the device against dirt and humidity.
Protect the stud welding device against unauthorised access by third parties.
5 Disposal
Local environmental directives must be observed when disposing of the device.
Water-endangering as well as environmentally hazardous substances are to be
disposed of in accordance with legal regulations.
If applicable, materials must be separated according to regulations.
Содержание SRM EcoWeld BMK-20i
Страница 2: ......
