Soyer BMK-12 W, Руководство по эксплуатации

Страница: 44 / 68

BMK-8 U / BMK-12 W
44
8 Maintenance
8.1 Important instructions
The stud welder is constructed in such a way that only a minimum of maintenance is required. The
interior of the stud welder should, however, be cleaned by a specialist at regular intervals depending
on the environmental conditions at the location of use.
WARNING
It is prohibited to open the stud welder.
The service personnel are required to meet special qualifications
Our after-sales service has adequately trained personnel, suitable service equipment and
the means to carry out all necessary works.
8.2 Important instructions for all service works
DANGER
Always disconnect the mains cable from the mains supply before starting any repair,
maintenance or cleaning works.
Always disconnect the connecting plug from the mains supply socket before opening the
housing of the stud welder. Only trained and appropriately qualified personnel are
allowed to carry out works at the electric mains supply and welding system.
NOTE
Only use original SOYER ® spare parts.
8.3 Cleaning
Cleaning should be carried out once a week depending on how soiled the stud welder is.
Please pay particular attention to foreign substances in and around the air apertures in the housing.
8.3.1 Detergents
Almost every detergent without corrosive or acidic substances is suitable for cleaning purposes.
However, please observe the manufacturer’s specifications on the detergent you intend to use.
8.4 Replacement of components
Defective components may only be replaced by trained SOYER servicemen. Perfect function of your
stud welder can only be guaranteed when original SOYER spare parts are used.
CAUTION
Disconnect the mains cable from the mains supply and disconnect the shielding gas and
compressed-air supplies before replacing any components. Electric and electronic
components may only be replaced by the SOYER
®
customer service or by trained and
appropriately qualified personnel.