20
Operating manual Soyer Bolzenschweißtechnik
6 Description of the BMK-10i stud welding device
The main elements of the stud welding device and their function are shown and
described in the following.
6.1
Type designation
Designation
Order number
Feature
BMK-10i
PO1366
Mains voltage :
3 x 400 V, 50/60 Hz, 16 AT
6.2
Working method
Pins and threaded studs from M3
– M10 and M12 HZ-1R (M6 to M10 preferred) made
of steel and stainless steel can be welded using the SOYER
®
BMK-10i stud welding
device.
Only welding studs from SOYER
®
(HZ-1 and MF types) must be welded.
The BMK-10i working with SRM technology
®
was specially developed for mobile use.
Thanks to SRM, the BMK-10i mobile welding device enables problem-free welding,
even in constrained positions.
The BMK-10i works on the basis of a compact inverter current source and delivers a
constant welding current up to 600 A with extremely short welding times. The rectified
mains voltage is converted into a high frequency voltage with a frequency of 75 kHz by
an Insulated Gate Bipolar Transistor-based (IGBT-based) inverter. The energy is
transferred by a high frequency transformer and rectified on the output side. As a result
of the high control speed in combination with the integrated SRM welding process of
the BMK-10i, the reproducibility of the welds is increased and the quality of the welding
significantly improved.
Содержание BMK-10i
Страница 2: ......
