V200929
12
07
14 : 49 : 04
WED
Duty
:
0
14 : 49 : 04
WED
Duty
:
0
12/07
LCD / Biometrics Access Controller
Access programming mode
→
Add/Delete
→
Add -> RF-Learn
→
Input 5-digit user address
→
Input Tag Units(pcs)
→
Close Tag into RF Area
※
If the batch of tags are
Sequential
, input Tag Units(pcs) in the quantity of the tags and present the tag with
the
lowest number
to the controller for adding all the tag data; otherwise, the tags must be presented to the controller individually
1
2
Adding Tag by RF Learn Function
Tag Information
SITE CODE
CARD CODE
SITE CODE
CARD CODE
※
User capacity: 16384 (00000~16383)
Access programming mode
→
Add/Delete
→
Add -> Card ID
→
Input 5-digit user address
→
Input Site Code
→
Input Card Code
1
1
Adding Tag by Tag ID
Access programming mode
→
Add/Delete
→
Delete -> Addr
→
Input Start address
→
Input End address
1
5
Deleting User Address
Access programming mode
→
Add/Delete
→
Suspend -> Addr
→
Input Start address
→
Input End address
1
3
Suspend User Address
Access programming mode
→
Add/Delete
→
Suspend -> ID #
→
Input Site Code
→
Input Card Code
1
4
Suspend Tag by Tag ID
Access programming mode
→
Add/Delete
→
Delete -> Addr
→
Input Start address
→
Input End address
1
7
Recover User Address
Access programming mode
→
Add/Delete
→
Delete -> ID #
→
Input Site Code
→
Input Card Code
1
8
Recover Tag by Tag ID
D. Adding and Deleting Tag
1. System will automatically exit Programming Mode when inactivating for 30
seconds.
2. LED status indicates controller’s mode and status.
OK (green) – blinking constantly when operating in Programming Mode
– or flashing an existed card in card learn mode, it comes 2 beeps
warning and LCD panel displays “Same Card: user address / card
number”
Error (red) – invalid card with 2 beeps warning and LCD panel displays “Card
Number Err!”
– or in anti-pass-back mode, when violates the access, it comes one
beep warning and LCD panel displays “Anti-pass Error!”
Arming (green) – arming on status
Alarm (red) – any abnormal condition occurs
3. Keypad will be locked up 30 sec. when incorrect pin code or master code is
constantly entered.
4. Maximum error input of pin code and master code can be changed via the
software 701Server (default: 5 times)
Power
(Green)
Alarm
(Red)
Arming
(Green)
OK
(Green)
Error
(Red)
In processing
(Green)
Networking : / and interactively flash between the Month and DAY.
[e.g.]
12/07←→12 07
Stand-alone : No flashing
[e.g.] 12/07
(←Reference to picture)
Manu Tree
Function Description of Front Panel & Indicator
5. Tools
1. Language
2. Master Code
3. Master Range
4. Terminal RS-485
5. Ext.Comm CN11
6. Open Time Zone
7. Informations
8. Clock Setting
9. Daily Alarm
0. UART Port CN9
A. Event Logs
6. Quit
7. Quit & Arming
4. Parameters[2]
1. Auto Relock
2. Egress(R.T.E)
3. Miscellaneous
4. Force Open
5. Close & Stop
6. Anti-pass-back
7. Duress Code
8. Password Mode
9. Factory Reset
3. Parameters[1]
1. Node ID
2. OnOff OpenZone
3. Door Relay Tm
4. Door Close Tm
5. Alarm Relay Tm
6. Alarm Delay Tm
7. Arming Delay Tm
8. Arming PWD
2. User Setting
1. Password
2. Access Mode
3. Extend Options
4. Single Floor
5. Multi Floor
6. Enroll Finger
7. Delete Finger
1. Add/ Delete
1. Add > Card ID
2. Add > RF Learn
3. Suspend > Address
4. Suspend > ID #
5. Delete > Address
6. Delete > ID #
7. Recover > Address
8. Recover > ID #
9. Antipass Group