Wall Surface
Use Appropriate Fasteners
Model：
TCP/IP Module
ACT
BUSY
LINK
PC
HUB
ACC900
Converter
RS-485
to RS232/USB
ACC900
TCP/IP Module
TCP/IP Module
ACT
BUSY
LINK
PC
1
ON
2
DHCP Function
TCP/IP module supports
the auto-configuration of IP,
gateway Address and
subnet mask; however,
must be sure the DHCP
server is available.
Dip-Switch
Switch 1
Switch 2 Serial Set up Mode
TCP/IP Module Configuration
Description
LED Name LED Color LED Function
Media is connected.
Media is disconnected.
10Mbps Ethernet is
connected.
Ethernet cable is
disconnected or has
a short.
Serial Set up Mode is
functioning.
Serial Set up Mode is
not functioning.
Yellow
Off
Off
Green
Off
Red
Busy
Link
ACT
IP Resent Button
Programming
1.EEPROM Restoring
Power Off → Take off the battery connector
from “BAT+” socket → J5 jumper shift to
“Clear” position for 15 seconds → Shift J5
back to “RUN”position → Plug in battery
connector → Re-apply the power → Done
2.IP Address Reset
a. Shift 2 dip-switch of TCP/IP module to “OFF”
b. Press IP reset button more than 5 seconds, and
then TCP/IP module will restore to factory default value
as follows:
IP Address
Gateway IP
Subnet Mask
Serial Port
TCP Port
Password
: 192.168.001.127
: 192.168.001.254
: 255.255.255.000
: 9600,N,8,1
: 1621
: None
a.
b.
1
ON
2
A.Restoring Factory Settings
B.Setting up the IP Address
A.
C.
B.
1.Get IP address by Net727 software
If the computer has no DHCP
Server built-in, user could get
default IP address and modify it as
their real IP address by Net727
software.
a.Get PC’s IP configuration (Please
write down the IP Address)
(1) By Net727 version 2.08 (Local IP)
(2) WinXP/2000: Start →
Programs → Accessories →
Command Prompt →
C:\ipconfig
(3) Win98: Start → Execute →
winipcfg
b. Press “IP Reset” button to ensure
TCP/IP has restored to factory
default value.
According to the width of two holes on the backside
of AR-716E to nail/screw the mounting nails/screws
on the wall, and then, hang AR-716E on the wall.
Write
v070604
A.Controller
D.Keys
1
SOYAL
AR-716E
156.137.86.8
