Manual –Sonic toothbrush
page
21
MAINTENANCE
Safety
Any type of cleaning or physical maintenance, must always be done with the product removed from the base of the
charger. In order to follow such procedures , strictly follow the instructions written in this manual.
The illumination system (natural or artificial) in the area where you are effecting maintenance must assure the
following minimum value of illumination : 200 lux
DANGER
Disconnect
the charging base from the main power source before
carrying out any cleaning or physical maintenance on it.
For any maintenance and cleaning operations, in addition to the instructions contained in this manual, the general
safety regulations and occupational safety regulations must be respected in the place where these operations are
carried out.
Periodic Maintenance
It is necessary to periodically replace the head of the toothbrush, which is a component of the toothbrush subject to
wear. We suggest substituting it every 3 months and every time it may result damaged or worn.
Clean the base of the charger periodically with a dry cloth ,only once you have unplugged it
.
SPECIAL MAINTENANCE
Special maintenance is required in case of malfunctions or breaking, an unexpected accident or inappropriate use of
the product.
Issues that can arise from time to time that are completely unpredictable and therefore it is not possible to describe
appropriate intervention procedures for all.
If necessary, consult the technical service of the manufacturer to receive instructions that are appropriate to the
situation.
ATTENTION
It is forbidden to access the internal parts of the product. There are no
maintenance plans to dismantle the toothbrush. Maintenance of
internal parts can only be performed by a qualified electrician.
