Quick Start Guide
1
Unpack the Hedge Trimmer
a) Open carton carefully and remove all items
b) Ensure you have all items (see above) before you discard the packaging
3
Starting the Hedge Trimmer
Do you have questions?
We can help
Call Customer Service
Mon-Thur 08:45 am - 5:00 pm
Friday 08:45 am - 3:15 pm
UK: 0151 649 1500
IRELAND: 189 094 6244
Spare Parts also available
Items Included
1 Plug spanner
2 Mixing Bottle
3 Blade guard
1
2
3
2
Fuel / Lubrication
a) Mix the fuel in the mixer bottle provided
b) Shake the container gently to ensure that
it is properly mixed.
N.B Failure to use the correct oil/fuel mixture
will cause the engine to seize
Fuel Mixture is
40:1 (40 parts Fuel
to 1 part 2 stroke oil)
Use regular grade
unleaded petrol
and quality 2 stroke oil
Choke Lever
Fuel Cap / tank
Starter Cord
Primer bubble
Ignition switch
Throttle
lever
Add the petrol/oil mix to the hedge trimmer
1) Set the machine on a hard level surface
2) Set the choke lever to “ON”
3) Push the primer 10 times
4) Set the throttle lever to full throttle.
5) Pull the starter cable rapidly 4 times
6) Set the ON/OFF switch to (ON) “I”
7) Pull the starter cable up to 6 more times
NOTE: amount of choke will vary slightly
Depending on the external temperature.
(Warm = choke “OFF” , cold = Choke “ON”
8) When the engine has started, set the choke
lever to “OFF” and allow the machine to
warm up for approximately 10 seconds.
To stop the machine, set the ON/OFF ignition
switch to “Stop” or “0”.
