SECTION 2: INSTALLATION
This appliance must be installed and connected in accordance with
current regulations by a qualified GAS ENGINEER.
2.1. INSTALLATION OF OVEN
This appliance can be placed next to or in between built-in kitchen
furniture. However, the height of the built-in furniture must not exceed the
height of the cooker hotplate. The furniture adjacent to the oven must be
resistant to temperatures 50 °c higher than the room temperature. Ensure
that there is a minimum of 2cm clear space behind the cooker to allow for
air circulation.
You must allow a minimum height of 650mm between the cooker hotplate
a cooker hood fitted above it. You must not allow fitted wall cupboards to
overhang the area directly above the hotplate. See Figure 1. below.
Min. 60 cm.
C O O K E R H O O D
It is important that this cooker is installed in a room that has adequate
ventilation. You may need a suitable air-brick, cooker hood or extractor to
Your qualified Gas Engineer will advise you.
This appliance requires 2m3/h air per KW input whilst in operation.
The use of a gas cooking appliance results in the production of heat and moisture in
the room in which it is installed. Ensure that the kitchen is well ventilated: keep
natural ventilation open or install a mechanical ventilation device (mechanical
extractor hood) as detailed above.
