13
c) Do not attach a toothed saw blade.
Such blades
create frequent kickback and loss of control.
d) Always feed the bit into the material in the
same direction as the cutting edge is exiting from
the material (which is the same direction as the
chips are thrown).
Feeding the tool in the wrong
direction causes the cutting edge of the bit to climb
out of the work and pull the tool in the direction of
this feed.
speed cutters or tungsten carbide cutters, always
have the work securely clamped.
These wheels will
grab if they become slightly canted in the groove, and
cutter or tungsten carbide cutter grabs, it may jump
from the groove and you could lose control of the
tool.
a) Use only wheel types that are recommended
for your power tool and only for recommended
intended for peripheral grinding, side forces applied
to these wheels may cause them to shatter.
b) For threaded abrasive cones and plugs,
use only undamaged wheel mandrels with an
