Sovereign 594448 Скачать руководство пользователя страница 3

Страница: 3 / 28

GENERAL SAFETY INFORMATION

WARNING! Read all safety warnings,

provided with this power tool.

Failure to follow all instructions listed below

injury.

Save all warnings and instructions for future

reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-

operated (cordless) power tool.

1) Work area safety
a. Keep work area clean and well lit.

Cluttered or

dark areas invite accidents.

b. Do not operate power tools in explosive

atmospheres, such as in the presence of

ﬂammable liquids, gases or dust.

Power tools

create sparks which may ignite the dust or fumes.

c. Keep children and bystanders away while

operating a power tool.

Distractions can cause

you to lose control.

2) Electrical safety
a. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adaptor plugs with earthed (grounded) power

Содержание 594448





























Результаты поиска

Содержание 594448

Отзывы:

Похожие инструкции для 594448

Бренды по названию

Популярные бренды

Sovereign 594448, Оригинальное руководство пользователя

Результаты поиска

Содержание 594448

Отзывы:

Похожие инструкции для 594448

Бренды по названию

Популярные бренды