8
POWERED DANDY LIFTS
CASTER
CONFIGURATION
The Powered Dandy Lift Series is
supplied with four swiveling casters.
One of the rear casters is fitted with a
brake and the other rear caster has a
direction lock.
DIRECTION LOCK
The direction lock prevents the caster
from swiveling but allows the caster to
roll as usual. Use it when pushing the
Powered Dandy Lift Series in a straight
line to provide greater stability.
BATTERY
The Powered Dandy Lift Series is
supplied with a 24 volt battery pack,
two 12 volt batteries in series.
Figure 2. Brakes
Figure 1. Component Identification
Brake Locked
Brake Released
NOTE!
These units ship with batteries
disconnected in the battery
box. Please connect as shown
in the diagram on the battery
box before attempting to
charge unit.
WARNING!
The battery contains lead acid
and should not be punctured or
damaged. Seek urgent medical
advice if acid contacts skin or
clothing. Ensure that the battery is
disposed of safely and according
to local regulations.
CAUTION!
Because the batteries self-
discharge over time you can
not expect the battery to be fully
charged. When you receive your
Powered Dandy Lift Series it is
recommended that you charge
the battery immediately. See
Figure 5 on page 9 for charging
instructions.
CAUTION!
Do not overload the Powered
Dandy Lift Series, as this may
damage the unit.
CAUTION!
Do not let loads significantly
overhang the platform, as this
could result in the platform
being overloaded, and cause
the Lift to tip over.
Figure 1. Operating the Powered Dandy