Southworth Products
PUN Manual
24
4. Attach the lower and upper hydraulic supply lines.
5. Be sure everyone is clear of the equipment. Turn on the power and test the
unit. Run the mechanism through a couple of cycles to completely purge any air
trapped in the hydraulic lines.
8.9 Ordering Replacement Parts
Southworth has carefully chosen the components in your lift to be the best available for the
purpose. Replacement parts should be identical to the original equipment. Southworth will
not be responsible for equipment failures resulting from the use of incorrect replacement
parts or from unauthorized modifications of the machine.
Southworth will gladly supply you with replacement parts for your Southworth lift. With your
order, please include the model number and the serial number of the lift. You can find these
numbers on the name plate, which is located on the crossbar at the base of the cylinder(s).
When you are ordering parts for a cylinder, also include the cylinder number. This is
stamped on the base of the cylinder housing.
To order replacement parts, please call the Parts Department. See Warranty & Contact
Information section.
• Parts are shipped subject to the following terms:
• FOB factory
• Returns only with the approval of our parts department.
• Payment net 30 days (except parts covered by warranty).
• Freight collect (except parts covered by warranty).
• The warranty for repair parts is 30 days from date of shipment.
Parts replaced under warranty are on a “charge-credit” basis. We will invoice you when we
ship the replacement part, then credit you when you return the worn or damaged part, and
we verify that it is covered by our warranty. Labor is not covered under warranty for Parts
orders.
