Southworth Products
DDL Dock Lift Manual
6
Workplace Inspections
- Before the machine is used and during use, the operator shall check
the area in which the machine is to be used for possible hazards such as, but not limited to:
1.
Bumps, floor obstructions and uneven surfaces
2. Overhead obstructions and electrical hazards
3. Presence of unauthorized persons
4. Other possible unsafe conditions as noted in the operating manual.
Operator Warnings and Instructions
- The operator shall ensure the operation of the machine
is in compliance with the following:
Guarding system
- Guarding shall be installed and positioned, and access gates or openings
shall be secured per the manufacturer’s instructions.
Distribution of load
- The load and its distribution on the platform shall be in accordance with the
manufacturer’s rated capacity for that specific configuration.
Maintaining overhead clearance
- The operator shall ensure that adequate clearance is
maintained from overhead obstructions and energized electrical conductors and parts.
Point of Operation
- The operator shall not place any part of their body under the platform.
Precaution for moving equipment
- When other moving equipment or vehicles are present,
special precautions shall be taken to comply with the safety standards established for the
workplace.
Reporting problems or malfunctions
- The operator shall immediately report to a supervisor
any problem(s) or malfunction(s) that become evident during operation. The operator shall ensure
all problems and malfunctions that affect the safety of operations are repaired prior to continued
use.
Capacity limitation
- Rated capacity shall not be exceeded when loads are transferred to the
load enclosure.
Work area
- The operator shall ensure the area surrounding the machine is clear of personnel
and equipment before lowering the load enclosure.
Securing the machine
- The operator shall comply with the means and procedures provided to
protect against use by an unauthorized person(s).
Altering safety devices
- Safety devices shall not be altered or disabled.
Modifications
or alterations of the machine or the fabrication and attaching of frameworks or the
mounting of attachments to the machine or the guarding system shall only be accomplished with
prior written permission of the manufacturer.
Assistance to the operator
- If an operator encounters any suspected malfunction or any hazard
or potentially unsafe condition relating to capacity, intended use or safe operation the operator
shall cease operation of the machine and request further instruction from the owner/user.
Problems or malfunctions
- Any problem(s) or malfunction(s) that affect the safety of operations
shall be repaired prior to the use of the machine.
2. Safety
All personnel installing, operating, and maintaining this machine shall read and understand this
manual. For questions or concerns contact the manufacturer.
This machine shall be installed, operated, and maintained by trained and/or qualified personnel
only.
