Southworth APCU Series, Руководство по эксплуатации и техническому обслуживанию

Страница: 4 / 46

4 APCU Owner’s Manual
Introduction
The Southworth All-Purpose Container Unloader (APCU) is designed to unload containers and pallets.
APCU units are designed for tilting and dumping of equipment and materials in a general indoor industrial
setting.
This manual contains instructions on the safe and proper installation, use, and maintenance of the All
Purpose Container Unloader unit. Be sure that this manual is available to the people who install, use, or
service the unit. Be sure that all personnel read this manual before they install, use, or service the unit.
The instructions in this manual are not necessarily all-inclusive, as Southworth cannot anticipate all
conceivable or unique situations.
In the interest of safety, please read this whole manual carefully.
Please understand the material in this manual before you install, use, or service the APCU unit. If
you have any questions about any of the instructions in this manual, please contact Southworth
Products Corp.
Southworth’s product warranty is shown on the rear cover of this manual. This instruction manual is
not intended to be or to create any other warranty, express or implied, including any implied
warranty of merchantability or fitness for a particular purpose, all of which are hereby expressly
excluded.
As set forth more specifically in the product warranty, Southworth’s obligation under that
warranty is limited to the repair or replacement of defective components, which shall be the buyer’s
sole remedy
, and Southworth shall not be liable for any loss, injury, or damage to persons or property,
nor for any direct, indirect, or consequential damage of any kind resulting from the APCU unit.
This manual is intended for stand alone APCU machines
shipped about May 2015, and after with control panels supplied
Southworth Products. Please contact Southworth Products for
information about APCU machines shipped before May 2015 or
machines with control panels, control and hydraulic schematics,
PLC logic, or other differences that do not match those shown
in this manual.