DESCRIPTION OF OPERATION
PURPOSE OF THIS MANUAL
5
6
IDENTIFICATION
SETUP AND OPERATION
The HB1A-9 Universal Cable Tray Roller guides are designed to
quickly and easily clamp-on to most cable trays and hinge open
and close to allow cable to pass through while guiding wire along
the cable tray and reducing pulling tensions during a cable pull.
Multiple configurations based on additional mounting platforms.
This manual is intended to familiarize all personnel with the safe
installation and operation of the following Southwire Tools and
Equipment: HB1A-9 Universal Cable Tray Roller.
Keep this manual available to all personnel. Replacement manuals
are available upon request at no charge at
www.southwiretools.com.
1. The HB1A-9 Side-Tray Clamp version can be clamped to the side
wall of the cable tray. This is useful for guiding cable through bends
or risers - Attach Foot to horizontal bar of cable tray to secure in
place.
2. Loosen “T” handle clamp on the base of the cable tray roller and
install onto side rail of cable tray.
3. Ensure Tray Support Bracket (5) is installed over horizontal bar of
cable tray and pin into place.
4. Tighten “T” handle clamp ensuring there is no obstruction on the
inside of the cable tray.
HB1A-9
1. Roller Locking Pin
2. Heavy Duty Tray Rollers
3. Mounting Bracket
4. Mounting Bracket Locking Pin
5. Tray Support Bracket
6. Side Guide Rollers
1
2
4
3
6
5
Multiple configurations based on additional mounting platforms.
HB1A-9 VERSIONS
HB1A-9STC
1