Southwestern Bell GH3128, Руководство пользователя, Страница: 13 / 15

24 25
CALLER ID OPERATION (CONT.)
Caller ID Erase
To Erase a Single Call
1. Press VOLUME/ SCROLL or
button to review the Caller ID records
you received.
2. Press DELETE button to erase the
call displayed; the display will show
“DELETE CID?”.
3. Press MENU/CONFIRM button to
confirm; the Caller ID will be erased and
the display will show “CID DELETED”and
return to standby mode.
To Erase All Calls
1. Press the VOLUME/ SCROLL or
button to review the Caller ID records
received before erasing all calls.
2. While the display is at one of the
numbers, press and hold the DELETE
button for 3 seconds. The display will
show “DELETE ALL CID?”.
3. Press the MENU/CONFIRM button,
all CID numbers will be erased and the
display will show “ALL CID DELETED”.
NOTE:
All the CID numbers will be deleted
including the new calls that have not
been reviewed.
TROUBLESHOOTING
If your telephone is not performing to your expectations, please try these simple steps :
Problem
“Charging” won’t show on
when handset is placed in
base unit.
No dial tone.
Handset doesn’t ring.
Suggestion
• Make sure the AC Adapter is plugged into
the base unit and wall outlet.
• Make sure the wall outlet is functioning.
• Make sure the handset is properly seated in
the base unit.
• Make sure the rechargeable battery pack is
properly placed in the handset.
• Make sure that the charging contacts on
the handset and on the base unit are clean.
• Charge the handset for 10 hours before
initial use.
• Place the handset back into cradle for 5
seconds.
• Make sure the handset is fully charged.
The base display should show “CHARGING”
when the handset is in the cradle.
• Make sure the Ringer setting is set to the
“On”.
• Rechargeable battery pack may be weak or
not fully charged. Charge the battery pack
for 4-5 hours.
• Make sure the base antenna is in the
upright position.
• The handset may be too far away from the
base unit.
• Make sure the AC adaptor is plugged into
the base unit and wall outlet.
• Make sure the wall outlet is functioning.
• There may be too many telephones
installed on the same line. Contact your
local telephone company to determine the
maximum number of extensions for your
calling area.
• Place the handset back into cradle for 5
seconds.