background image

C. For maximum performance, always keep the battery pack fully

charged.

D. Plug your AC adaptor directly into an outlet, not an extension

cord.

E. Do not plug other appliances into the outlet or have the outlet

controlled by a wall switch.

F. If you want to use more than one cordless telephone in your

home, the telephones must operate on different channels. Press
the channel key to select a channel that provides the clearest
communication.

Installation
Box Contents

Before installing your phone, check the shipping carton to be sure
you have the following:
* Base Unit

* Long Telephone Line Cord

* AC Adaptor

* Owner's Manual

* Handset with Rechargeable Battery * Belt Clip
* Registration Card

Notes:

a. Keep the shipping carton and packaging, in case you need to ship

your phone.

b. If there is visible damage, do not use this equipment. Contact

your shipping agent or return the telephone to the place of
purchase.

Preliminary Preparation Telephone Line Installation

1. Never install telephone jack during a lightning storm.
2. Never install telephone jack in wet location unless the jack is

specifically designed for wet locations.

3. Never touch uninsulated telephone wires or terminals unless

the telephone line has been disconnected at the network
interface.

4. Use caution when installing or modifying telephone lines.

Modular Outlet

The GH3110 Cordless Telephone operates from a standard 110/120
volt modular outlet. The handset is powered by a rechargeable battery
pack. Batteries are charged automatically when the handset is placed
in the cradle of the base unit.

Installation

A. Plug one end of the long telephone line cord into the back of the

unit and connect the other end to a modular wall jack. Press until
locking lever clicks.

B. Connect the DC Adaptor into the back of the unit. Plug the other

end into a standard 110/120 volt AC outlet.

C. Place the handset into the base unit. The IN USE/ CHARGE LED

will light. The LCD display will show "NEW CALL 00" for 2
minutes and then return to standby mode.

NOTE: BATTERY PACK MUST BE CHARGED FOR 16 HOURS
BEFORE INITIAL OPERATION.

Handset Battery Charging

The battery pack in the handset must be fully charged for about 16
hours before using the telephone.

NN

NO

Содержание GH3110


















Отзывы: