Questions? Call Toll Free at 1-800-737-2112
Copyright © 2009 MAT Engine Technologies, LLC
Edger Specifications
• Save all instructions
Unit Weight. . . . . . . . . . . . . . . . . . . . . . . . . 50.3 lb. (22.8kg)
Cutting Depths . . . . . . . . . . . . . . . . . . . 0-2.5 in. (0-63 mm)
Blade Diameter. . . . . . . . . . . . . . . . 9 in. (228 mm), 2 point
Gasoline Type . . . . . Regular Unleaded / 88 Octane (min.)
Gasoline Capacity . . . . . . . . . . . . . . . . . . . . . 1.7 qt. (1.6L)
Oil Type (API SG-SL) 10W-30 is recommended for all ser-
vice temperatures. See page 7 for additional information.
Oil Capacity . . . . . . . . . . . . . . . . . . . . . . . . . 12 oz (355 ml)
Spark Plug Model. . . . . . . . . . . . . . . . . . . . . . Torch E7RTC
Spark Plug Gap . . . . . . . . . . . 0.024-0.028 in. (0.6-0.7 mm)
Engine Type . . . . . . . . . . . . . . . . . . . . . . . . . 4 Stroke OHV
Displacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79cc
RPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3600 RPM
Torque Rating. . . . . . . . . . 3.5 ft-lbs torque per SAE J1940
Bore Diam. x Stroke. . . . . . . . 2.03X1.50 in. (51.6X38 mm)
Intake Valve Clearance . 0.0079-0.0098 in.(0.20-0.25 mm)
Exhaust Valve Clearance . 0.0098-0.012 in.(0.25-0.30mm)
Angle of Ignition . . . . . . . . . . . . . . . . . . . . . . . . 25 Degrees
5
Parts & Features
1.
Start Lever
Lever on handle which allows the engine to
run. When lever is released, engine will stop.
2. Choke Control
Restricts the air intake. This allows for an
enriched fuel-air mixture which helps to start the engine.
3. Muffler
Location of engine exhaust.
4. Recoil Starter Handle
The engine is equipped with an
easy pull recoil starter.
5. Blade
Rotating cutting element.
6. Blade Guard
Prevents stones and debris from being
thrown at the operator.
7. Spark Plug/Spark Plug Wire
Provides spark to ignite air/
fuel mixture. The Spark Plug Wire must be disconnected and
moved away from the Spark Plug when servicing the unit.
8. Air Filter
Removes debris and contaminates from intake
air, allowing engine to run smoothly with low exhaust.
9. Depth Selector Plate, 10. Depth Control Lever,
11. Control Rod
Used to control the edging depth of cut.
12. Flameout Wire Terminals
Must be connected for the
Start Lever to function.
Figure 1
REAR VIEW
FRONT VIEW
7
3
1
6
4
5
9
8
10
12
11
2
