Questions? Call Toll Free at 1-800-737-2112
Copyright © 2011 MAT Engine Technologies, LLC
Assembly
(Continued)
• Save all instructions
To Assemble Trimmer Guard:
A
To Adjust Front Handle:
B
The Front Handle on your Trimmer is adjustable for
your comfort, and requires adjustment from its shipping
orientation before your first use of the Trimmer. To adjust
the Front Handle:
1. Loosen wing nut on the Front Handle.
2. Adjust Front Handle to desired position and re-tighten
wingnut until the handle is secure (see Fig. 6).
5
TIGHTENING
Fig. 6
1. The Trimmer Head Assembly must be removed to
enable the Trimmer Guard to be assembled. To remove
the Trimmer Head Assembly:
a. Remove the bump knob from the trimmer head by
turning the knob counter clockwise (see Fig. 1)
b. Remove trimmer line spool and Spool Housing (see Fig. 2)
2. Disassemble the nut, washer and bolt from the Trimmer
Guard (as received in the trimmer package).
3. Assemble Trimmer Guard over the end of shaft and
align holes in Trimmer Guard with guard bracket on shaft
(see Fig. 3)
4. Assemble bolt, washer and nut through Trimmer Guard
and guard bracket. Tighten nut securely (see Figs. 4a-4b)
by using 10mm wrench.
5. Assemble the Trimmer Head Assembly by tightening the
bump knob clockwise (see Fig. 4b).
6. Remove protective cover from trimmer line knife.
CAUTION
The Trimmer Line Knife is sharp and can cut you (see Fig. 5).
Fig. 2
ALIGN HOLES
Fig. 3
Fig. 4a
Fig. 5
Fig. 1
LOOSENING
Fig. 4b
