Questions? Call Toll Free at 1-800-737-2112
Copyright © 2011 MAT Engine Technologies, LLC
Assembly
(Continued)
• Save all instructions
5
WARNING
Blower tube installation affects both Blower balance and
performance. The tube and nozzle must be installed
correctly.
Never use the Blower without the upper tube and the
nozzles correctly fitted to the Blower.
WARNING
Rotating impeller blades can cause sever injury! Stop the
engine before installing or removing the Blower tubes.
Never perform any maintenance or assembly procedures
on this Blower while the engine is running.
1. Align the arrow on the upper tube with the arrow on the
nozzle tube. (Fig. 2 ).
2. Slide the nozzle tube to the upper tube.
3. Turn the nozzle tube clockwise until a click is reached to
secure the nozzle tube to the upper tube. (Fig. 3)
4. Align the arrow on the upper tube with the arrow on the
Blower outlet. (Fig.4)
5. Slide the upper tube to the Blower outlet.
6. Turn the upper tube clockwise until a click is reached to
secure the upper tube to the Blower outlet. (Fig.5)
Note: Position tube so that engraved writing “This Side
Up” is in an upward position. (Fig. 6)
7. Tighten the screw, until the tube is secure. (Fig.7)
Blower Assembly
Fig. 2
Fig. 4
Fig. 6
( THIS SIDE UP )
Fig. 3
Fig. 5
Fig. 7
