Figure 5
Insert Cam Locks (C) into holes
on Upper Vertical Panel (8).
Screw Cam Bolts (A) into holes
pre-assembled unit from Figure
4.
Attach pre-assembled unit from
Figure 4 to Upper Vertical Panel
(8) by inserting Wood Dowels (A)
and Cam Bolts (C) into
corresponding holes until Panels
meet.
Tighten by rotating Cam Locks
(C) clockwise with Phillips
Screwdriver (not included).
Figure 6
Insert Cam Locks (C) into holes
on pre-assembled unit from
Figure 5.
Screw Cam Bolts (A) into holes
on Top Panel (9).
Attach pre-assembled unit from
Figure 5 to Top Panel (9) by
inserting Wood Dowels (A) and
Cam Bolts (C) into corresponding
holes until Panels meet.
Tighten by rotating Cam Locks
(C) clockwise with Phillips
screwdriver (not included).
