Figure 3
Insert Cam Locks (C) into holes
on Lower Vertical Panels (3/4).
Screw Cam Bolts (A) into holes
on Fixed Shelf Panel (1).
Attach pre-assembled unit from
Figure 2 to Fixed Panel (1) by
inserting Wood Dowels (A) and
Cam Bolts (C) into corresponding
holes until Panels meet.
Tighten by rotating Cam Locks
(C) clockwise with Phillips
screwdriver (not included).
Figure 4
Insert Cam Locks (C) into holes
on pre-assembled unit from
Figure 3.
Screw Cam Bolts (A) into holes
on Side Panels (5/6).
Attach pre-assembled unit from
Figure 3 to Side Panels (5/6) by
inserting Wood Dowels (A) and
Cam Bolts (C) into corresponding
holes until Panels meet.
Tighten by rotating Cam Locks
(C) clockwise with Phillips
screwdriver (not included).
Attach Center Leg (7) to Bottom
Panel (2) by hand.
