Page
7
Figure 7
Push firebox (14) into the back of the
unit and insert long flat head screws (I)
through wood holder (13) to lock tightly.
Figure 8
Use screws (Q) to connect brackets (P) to
lower top back (4) as shown.
Tighten screws (Q) with Phillips
screwdriver.
Drill 1/4 inch pilot holes in near proximity
of the brackets (P) attached to the lower
top back (4) and tap the plastic anchor (T)
into wall.
Use screws (R) to connect brackets (P) to
plastic anchors (T) on the wall.
Tighten screws (R) with Phillips
screwdriver.
Move this item close to the fastened wall
brackets (P) and tie in both brackets (P)
with plastic straps (S) as shown in
diagram.
Now your fireplace is ready to use.
