Page
6
Figure 5
Insert back panels (11L / 11R) into
grooves in the back of assembled unit.
Tighten screws (H) with Phillips
screwdriver.
To achieve uniform clearance around the door,
you may need to adjust the door by tightening
or loosening the two screws on the hinge itself.
Figure 6
Use short flat head screws (N) to
connect hinges (M) to door frames (7)
and left/right side panels.
Tighten screws (N) with Phillips
screwdriver.
Second, use long bolts (L) to connect
knobs (K) to door frames (7).
Tighten long bolts (L) with Phillips
screwdriver.
Insert shelf holders (O) into holes on
side panels (2L/2R) and partition panels
(3L/3R).
Finally, place adjustable shelves (12)
onto the shelf holder (O).
Screw for adjusting the door
D
oor
