South NTS-960R, Руководство по эксплуатации

Страница: 131 / 214

124
●
This function can realize search for the fill ‐ cut data.
●
Fill ‐ cut data can not be edited.
13. PROGRAM MENU
The menu includes below functions:
⑴ Set Out
⑵ Roads
⑶ Cogo
⑷ Traverse
⑸ B.Boards
⑹ Tape Dim
13.1 SET OUT
To show the SET OUT menu, from the
【
Program
】
menu, select
【
Set Out
】
. The setting
out option allows setting out by point number, strings, alignments and cross sections.
●
The basic routine for setting out is similar in all these methods, except for the way
data is uploaded and the setup sequence.
●
Setting out points allows setting out by point number in point number order. Setting
out strings allows setting out by string or point code in the order in which the points
were uploaded within the string. Setting out of alignment and cross sections, points
are specified by chainage and offset with reference to an uploaded alignment.
13.1.1 Occupied Point& Backsight Point
In [Program] menu, click [Set Out
]→[Setup]
, in the prompt menu click [Set] to enter
into Occ.&BS Set dialog box. The setting procedure is similar to those in [RECORD]