NET S9 user manual
15
Fig. 3-2 parameters configuration interface
Then
Start Base
means start the base station mode,
Diff Type
means differential data type.
There are three kinds of base station start mode:
HERE
：
Using automatic repeat coordinates to start the base station
OFF
：
Manually start the base station
NEW
：
Using automatic single point coordinate to start the base station
Under the arbitrary parameter interface mode, if you need to modify the parameters, you can
press the button
and modify the instrument parameters. At this time the cursor keeps
flashing, and then you can press the buttons
to change the location of the cursor, the
button
to modify the size of the parameter values. When these parameters all are
changed, if you press the button
, it will save the data, the cursor disappears, the new
configuration information goes into effect and the instrument return to the interface of
Parameter Settings. If press the button
, it will not save the data, the cursor disappears,
configuration information will restore and save previous information and the instrument
return to the interface of Parameter Settings. At the same time, you can continue to press the
button
to view the other parameters. If you want to configure of base station start mode
and sent differential data information directly, the screen lights up when you press any key,