South A1 1 Скачать руководство пользователя страница 22

Страница: 22 / 73

5. COLLECT

5.1 MEASURE POINTS

It included not only measure and record, but also the point coding and linking in graphic display.

: The current horizontal angle.

: The current vertical angle.

: The measured horizontal distance.

: The measured vertical distance.

: The measured slide distance.

Data

: Show the data of saved points.

Grap

: Show the graphic data of saved points.

: Input the ID of point. It will

add “

”

automatically on the point name in each time.

Code

: Input or select the code.

Link

: Input the ID of known point, the system will

create a line from the known point to current
point, and the line will display in graphic.

R.Ht

: The reflector height.

[DIST]

: Start to measure distance.

[SAVE]

: Save the previous result. If the distance

measurement was not carried out, the system
will save the current angle result only.

[ALL]

: Measure and save.

Содержание A1 1










































































Результаты поиска

Содержание A1 1

Отзывы:

South A1 1, Руководство пользователя, Страница: 22 / 73

Результаты поиска

Содержание A1 1

Отзывы: