P
The Leader in Nitrogen Generation Technology
FPS-500 O&M Manual
Revision 2; 3/2020
Page
5
of
30
1.4. Important Information
All personnel (and their supervisors) installing, operating, and maintaining the
N
2
-BLAST
®
must read
and fully understand this manual prior to installing, operating, or performing maintenance.
The
N
2
-BLAST
®
produces nitrogen (N
2
) at a low flow rate, which quickly dissipates into the air. N
2
gas is
not poisonous, but do not directly inhale since high concentrations can cause asphyxiation. Install the
unit in a well-ventilated room that is not sealed off from normal living space air changes.
All personnel involved with the installation, operations, and maintenance of the
N
2
-BLAST
®
must follow
safe working practices, including OHSA and local health/safety code regulations.
1.5. Limits of Liability
Buyer’s exclusive remedy for all claims shall be for damages, and seller’s total liability for any and all
losses and damages arising out of any cause whatsoever including, without limitation, defects in or
defective performance of the system, (whether such claim be based on contract, negligence, strictly
liability, other tort or otherwise) shall in no event exceed the purchase price of the system in respect of
which such cause arises or, at seller’s option, the repair or replacement of such; and in no event shall
seller be liable for incidental, consequential or punitive damages resulting from any such cause.
Seller shall not be liable for, and Buyer assumes all liability for, the suitability and the results of using
nitrogen by itself or in any manufacturing or other industrial process or procedure, all personal injury and
property damages connected with the possession, operation, maintenance, other use or resale of the
System. Transportation charges for the return of the System shall not be paid unless authorized in
advance by Seller.
NOTE: Any MODIFICATIONS made by the customer, without the written consent of South-Tek
Systems, will void the product’s warranty.
1.6. Service Return Policy
Follow these procedures to return the system when performing site repairs is not possible:
•
The owner must get a Return Material Authorization number, which references the model and serial,
from South-Tek Systems. South-Tek Systems will not accept any items for service or credit without
written authorization from South-Tek Systems.
•
Return all items within the original packaging material if possible. Package all items for safe return to
South-Tek Systems. South-Tek Systems will not be responsible for damages, which occur in transit.
Damages occurred from failing to adhere to these procedures will be the customer’s responsibility.
Contact South-Tek Systems for a return shipping address.
•
Shipping charges must be prepaid on all returns.
