South Bend Tools SB1099, Руководство пользователя

Страница: 5 / 52

South Bend Tools
For Machines Mfd. Since 11/20 Model SB1099
-3-
I N T R O D U C T I O N
Figure Figure 1. Main controls and components. . Main controls and components.
Description of Controls
& Components
A A
JJ
B B
C C
D D
E E
F F
II
H H
G G
Figure Figure 2. Remote control.
Refer to Figures 1-2 and the following
descriptions to become familiar with the basic
controls and components used to operate this
machine.
A. Inlet Adapter: Allows connection of three 4"
ducts to main inlet port.
B. Filter Brush Motor:
Turns ON for
approximately 90 seconds after main motor
is turned OFF. Knocks dust cake off filter
pleats, cleaning filter and maintaining air
flow. Filter brush motor run time can be
changed at timer inside switch box (refer to
Wiring Diagram on Page 43).
C. Pressure Gauge: Displays vacuum pressure,
indicating when filter needs to be cleaned
or replaced. Clean filter when operating
pressure drops below 200mmAq. If operating
pressure reaches 150mmAq and cleaning
does not improve performance, replace the
filter.
D. Switch Box: Controls motor operation with a
thermally protected magnetic switch. Houses
an RF receiver for remote control operation.
E. Start Button: Turns machine ON.
F. Emergency Stop Button: Turns machine
OFF and prevents it from starting. Turn
button clockwise to reset.
G. Drum Lock Handle: Secures dust collection
drum to lid when lifted. Releases collection
drum when pressed down.
H. Collection Drum: Collects large dust
particles. Equipped with vacuum equalizer
for using plastic collection bags and an
inspection window to see when drum is full.
I. End Cap: Collects fine dust particles from
filter. Includes outlet port for easy filter
cleaning.
J. Remote Control: Green button turns motor
ON. Red button turns motor OFF. Requires
a 12V, type A27 battery.
Note: The remote control operates on radio
frequency and has a 75-ft. range. It does
not need to be aimed at the switch box to
operate.