South Bend Tools SB1099, Руководство пользователя

Страница: 39 / 52

South Bend Tools
For Machines Mfd. Since 11/20 Model SB1099
-37-
M A I N T E N A N C E
Removing/Replacing
Canister Filter
If the canister filter is clogged or dirty and
cleaning does not improve dust-collection
performance, the canister filter must be replaced.
Items Needed Qty
An Assistant ..........................................................1
Safety Glasses (Per Person) ..................................1
Wrench or Socket,
1
⁄
2
" ............................................1
Hex Wrench 5mm .................................................1
Shop Vac ................................................................1
T30490 Canister Filter .........................................1
To remove and replace canister filter:
1. Cycle power to knock loose dust from filter,
then empty end cap (refer to Emptying End
Cap on Page 36).
2. DISCONNECT MACHINE FROM POWER!
3. Remove (6) flange bolts and filter cover
assembly from top of assembly housing
(see Figure 70).
Figure 70. Filter cover. Filter cover.
Filter Filter
Cover Cover
x6 x6
!
4. Loosen cap screw and remove lower
alignment arm from filter spindle (see
Figure 71).
5. Remove (3) button head cap screws securing
rear panel to housing assembly (see Figure 71).
Figure Figure 71. Lower alignment arm and rear panel . Lower alignment arm and rear panel
attachment locations. attachment locations.
Lower Lower
Alignment Arm Alignment Arm
x3 x3
6. Open filter doors.
7. While assistant supports rear panel, remove
(3) button head cap screws and flat washers,
then remove rear panel (see Figure 72).
Figure Figure 72. Rear panel attached to base. . Rear panel attached to base.
x3 x3
Rear Rear
Panel Panel