manualshive.com logo in svg

Source Technologies STP.1120N, Руководство пользователя

Поделиться
Скачать
Source Technologies STP.1120N Скачать руководство пользователя страница 36

3   |   Connections and Setup

STp.1120n User’s Guide

26

12. Rotate the latch lever counter-clockwise until the printhead mechanism is locked.

Figure: 3 - 21 Lock the Printhead Mechanism 

Note: 

If the media has been installed properly and read by the autoloading sensor, it 

should automatically feed under the printhead once the printhead carriage assembly has 
been latched and locked. If the media does not automatically load, unlatch the printhead 
carriage and manually feed the media under the printhead. Upon locking the printhead, it 
would be beneficial to feed the media by selecting the Feed button on the main menu to 
properly set the next label.

13. Set the Top-of-Form sensor.

Note: 

Refer to the section called “Setting the Top-of-Form Sensor”.

Содержание STP.1120N































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды