Source Technologies STP.1120N, Руководство пользователя

Страница: 105 / 158

Menu System | 4
95 STp.1120n User’s Guide
2. Select the Enter Ribbon ID field and use the keypad to enter the appropriate value.
Select the green Accept button to accept the value or the red Reject button to reject
the value.
3. Select the Paper Sensor Side field and select either the Outside or Inside value.
Note: If the paper media supports both thermal transfer and direct thermal printing, 0
(zero) can be entered into the Ribbon ID field for direct thermal mode.
Note: If a ribbon selection is not allowed for a given thermal transfer paper selection, a
“Data out of Range” error will be displayed when attempting to save the settings.
b. User Media
If the user has media setup files stored internally or on a USB mass storage device
connected to the USB host, the files can be selected from this interface.
Select the file and then select the green check button.
Note: The first tab displays files that have been saved internally. The second tab will
display files from the mass storage device attached to the USB host.
c. Select Type
For print media types that have not been qualified by the printer manufacturer, the Select
Type option allows the user to manually enter the media and ribbon types. This will
configure the printer to the approximate print settings.
The interface has three tabs:
• Paper
• Ribbon
• Settings
Paper
Using the up and down arrows, highlight the appropriate paper to be used.
Ribbon
Using the up and down arrows, highlight the appropriate ribbon to be used.
Settings
Choose the appropriate settings for your media and ribbon types.
Note: Fine adjustments to print settings may be required to improve print quality. The
Select Type utility is designed to approximate the print settings.
Paper Sensor Type
Print media contain distinctive characteristics and those characteristics must be
accounted for in the settings to ensure finding Top-of-Form.
Paper Sensor Side