Source Audio Collider Delay+Reverb, Руководство пользователя, Страница: 13 / 51

SA263
Collider Delay+Reverb Owner’s Manual
13
Controls
KNOBS Toggle Switch
This is the key to the whole operation. Flip the switch to the DELAY side to change Delay engines and
parameters with the knobs. Flip it to the REVERB side to alter Reverb settings. Flip it to the center
“LOCK” position to lock all controls in place, preventing accidental bumps in a live settin
g.
DELAY Knob (Time/Pre)
REVERB (Pre-Delay): Sets the Pre-Delay, meaning the amount of time between the dry signal and the
initial reverb reflections. As the DELAY knob is turned clockwise the pre-delay time increases creating
a sound similar to a natur
al echo or “slapback” effect.
DELAY (Time): Adjust the delay time, or speed of the repeats. Turn counter-clockwise for short,
“slapback” style repeats, or clockwise for long, ambient repeats.
MIX Knob
The MIX knob is primarily used to set the ratio between your wet and dry signals. This knob has a
slightly different function depending on whether you are in Cascade Mode or Parallel Mode. Please
note that Kill Dry Mode is also available as a global option (see Kill Dry Mode in the Neuro
Hardware
Options section of this manual).
Cascade Mode
Sets the relative levels of the wet and dry signals. Fully counterclockwise is 100% dry, fully