1.Plug the line
in cable into the the AUX IN socket.
2.Connect the other end of the line-in cable to your device’ s
headphone socket.
3.Press the ‘Source’ button to switch the source function to
‘AUX IN’.
4.Set your device volume level to maximum and press play on
your device.
Note: You can have a Bluetooth device paired and have an
AUX IN device connected at the same time. To switch between
the devices (Bluetooth or AUX IN)press the ‘Source’ button.
LED Status
Power OFF – LED OFF.
Power ON – LED ON (Blue).
Pairing Mode – LED Flashing Blue/Red.
Very Low Battery – LED will flash RED for 10 seconds and then
the OontZ will automatically switch OFF.
Battery recharging – LED Flashing slowly (Blue).
Battery fully recharged – (LED will revert back to the previous
LED status).
Compatibility (Bluetooth device)
Most Bluetooth 2.1 devices with A2DP/AVRCP/HFP/HSP.
A2DP - Advanced Audio Distribution Profile.
AVRCP - Audio/Video Remote Control Profile.
HSP - Headset Profile.
HFP - HandsFree Profile.
MD
MiniDisc
Mp3
Page5,Total11
© Copyright SoundWorks INC.
AU X
IN
AU X
IN
OF F
OF F
ON
ON
US B
US B
Oontz
www
.
TheOontZ
.
com
SoundWorks
,
INC
.
