Paring the OontZ with a Bluetooth Device
1. Ensure the OontZ is charged or that the OontZ is connected
to a USB power source.
2. On the back of the OontZ, slide power button to ON.
3. Press and hold the source button, until the OontZ
beeps and the red/blue LED starts flashing on the front of the
OontZ. (The OontZ will remain in pairing mode for 3 minutes to
connect to your Bluetooth device).
4.Use your Bluetooth device to search for OontZ and select it.
5.Enter pin "0000".
6.The OontZ will beep to confirm pairing, and the LED on front
of the OontZ will stop flashing. This confirms successful
pairing and you can play audio.
7.Check your Bluetooth device to ensure that connection is
successful.
8. Now you can play your music wirelessly from your device to
the OontZ.
Note: If no connection is made after 3minutes, the OontZ will
beep and the LED will turn OFF, repeat the steps above to
re-enter pairing mode.
Note: To switch Bluetooth devices, turn off the Bluetooth
connection on your device, the OontZ will go into pairing mode
and you can pair the next device.
To switch the OontZ between a Bluetooth device and an AUX
IN device press the source button .
Page3,Total11
© Copyright SoundWorks INC.
SOU
RCE
SOU
RCE
SOUR
CE
SOUR
CE
E
SOUR
CE
SOUR
C
Oontz
www
.
TheOontZ
.
com
SoundWorks
,
INC
.
