EN - 17
DAB mode
Select DAB as playing source
1. Press the [MENU] key on the front panel or touch the top left corner of the screen to open the
SOURCE MENU.
2. Select [
DAB+
] on the main menu to enter
DAB
mode.
If DAB is not on the current source menu, touch [
] button on the bottom of the screen.
* When playing, touch the bottom half of screen to show operation bar.
Select one DAB band
Touch the [ 1 2 3 ] button on top left of the screen to select one radio band among DAB1, DAB2
and DAB3.
Tune
There are four search mode. You can touch the middle of operation bar to select search mode
from followings:
1. Preset Search
Search preset service one by one.
2. Current Search
Service Search in the current Ensemble.
3. Manual Search
During manual tuning, the frequency will be changed in steps.
Touch the [ ] or [ ] button on the operation bar to tune in a higher / lower station.
Hold the [ ] or [ ] button on the operation bar for more than 2 seconds to seek a higher /
lower station.
To stop searching, repeat the operation above or press other buttons having radio functions.
4. ALL Search
Service Search for all stored by Station search.
Note:
When a station is received, searching stops and the station is played.
Preset scan
Preset scan receives the stations stored in preset memory in order. This function is useful when
searching for a desired station in memory.
1. Press the [
] button on the operation bar.
2. When a desired station is tuned in, press the
s
ame position to continue receiving that station.
Auto store
Only stations with sufficient signal strength will be detected and
stored in the memory.
To start automatic station search, touch following buttons on the
operation bar in sequence: [ ] -> [
] -> [
OK
] .
To stop auto store, press other buttons having radio functions.
Notes:
1. After auto store, the previous stored stations will be overwritten.
2. The unit has 3 bands, such as DAB1, DAB2 and DAB3.
Содержание CE69M7
Страница 1: ...Radio Navigation system USER MANUAL...
