INSTALLATION
1
SELECTING THE CROSSOVER MODES
The DaVinci amplifier incorporates a sophisticated, fully adjustable electronic crossover for each of its
three pairs of channels and subwoofer channel. The DaVinci amplifier can drive a complete system
without need of an outboard electronic crossover.
0
0
SUB
0
CURRENT
0
POWER
INPUT
MIDRANGE
Channels 1 through 6 of the DaVinci amplifier can be operated in
midrange satellite “dual
pass” configuration.
In the 4-way mode, you can quad-amplify with “active”
midrange and tweeter
output to maximize control over individual drivers. The “low range”
filter includes a low pass for the
active
(Channels
and a high pass filter for the separate midrange output (Channels
The
second “high range” band pass filter includes a low pass filter for the separate midrange output, and a separate
high pass filter for the separate tweeter (Channels
(NOTE: 4-way mode, Channels
inputs are
not used input is derived from Channels
10
LOW PASS
The subwoofer channel is designed to operate in low pass or full range. The low pass is a continuously variable
24
electronic crossover with a range of 30 120 Hz.
Z-WAY
HIGH PASS
The high pass crossover is used for sending only midrange and high frequency information to particular
speakers. Activate the high pass crossover to drive satellite or coaxial speakers in the system along with
subwoofers.
The high pass frequency can be adjusted separately for Channels 1 through 4 of the amplifier. In
mode, Channels
remote input is fed from Channels
(if Channels
are high pass, so are
Channels
REAR FILL OF-EMPHASIS
The DaVinci amplifier features an innovative rear fill de-emphasis circuit which places more emphasis on the
front stage when used in 2 or 3-way modes.
The circuit removes frequencies from channels
above
at the rate of 6
By removing upper frequency information from the rear fill, a more natural
sounding rear fill effect is created.
/SATELLITE
Channels
and
of the DaVinci amplifier can be operated in a
satellite “bandpass”
configuration. In the 3-way mode, you can tri-amplify with “active”
to maximize control over individual
drivers. This “low range”
filter includes a low pass for the active
(Channels
and a high
pass filter for the separate satellites (Channels
(NOTE:
mode, Channels
inputs
are nof
used input is derived from Channels