soundsation PAR-10W-5-B/BW, Руководство пользователя

Страница: 5 / 24

5
ENGLISH
PAR-10W-5-B / BW User manual
1.2.2. Heat
The apparatus should be located away from heat sources such as radiators,
stoves or other appliances that produce heat. Fixture may carry high heat, do
not aim at objective exceeding 2 minutes.
1.2.3. Ventilation
The unit must be installed in a location with adequate ventilation, at least 5m
away from adjacent surfaces. Be sure that no ventilation slots are blocked.
1.2.4. Object and Liquid Entry
Objects do not fall into and liquids are not spilled into the inside of the appara-
tus for safety.
1.2.5. Installation
Always secure fixture using a safety chain and carrying handles. Never carry
the fixture by its cord.
1.2.6. Power Cord and Plug
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two poles; a grounding-type plug has two poles and a third
grounding terminal. The third prong is provided for your safety. If the provided
plug does not fit into your outlet, refer to an electrician for replacement.
1.2.7. Power Supply
Always make sure that you are connecting to the proper voltage and the line
voltage not higher than stated on the decal or rear panel of the fixture. Unplug
this apparatus during lightning storms or when unused for long periods of time.
1.2.8. Fuse
To prevent the risk of fire and damaging the unit, please use only of the rec-
ommended fuse type as described in the manual. Before replacing the fuse,
make sure the unit turned off and disconnected from the AC outlet.
1.2.9. Electrical Connection
Always disconnect from the power source before servicing or replacing fuse/
lamp and be sure to replace with same fuse/lamp size and type. Cut off power
before moving, repairing and cleaning the machine. Improper electrical wiring
may invalidate the product warranty.
To avoid electric shock, all fixtures must be connected to circuits with a suit-
able ground. Do not power on and power off the fixture in a short time.
1.2.10. DMX connection
When use DMX controller, please make sure that there is no interference
sources (e.g. intercom, high frequency radio waves and radiation source.