background image

4

ENGLISH

MHL-230 User’s manual

1. GETTING STARTED

1.1 Important Safety Symbols

The symbol is used to indicate that some hazardous live termi-

nals are involved within this apparatus, even under the normal 

operating conditions, which may be sufficient to constitute the 

risk of electric shock or death.
The symbol is used in the service documentation to indicate 

that specific component shall be replaced only by the compo

-

nent specified in that documentation for safety reasons.

Protective grounding terminal
Alternating current/voltage
Hazardous live terminal
Denotes the apparatus is turned on
Denotes the apparatus is turned off

WARNING:

Describes precautions that should be observed to prevent the 

danger of injury or death to the operator.

CAUTION:

Describes precautions that should be observed to prevent dan-

ger of the apparatus.

1.2 Important Safety Instructions

 

f

Read these instructions

 

f

Keep these instructions

 

f

Heed all warning

 

f

Follow all instructions

Water / Moisture

This lighting is intended to indoor use only. To prevent risk of fire or shock, 

do not expose fixture to rain or moisture. Make sure there are no flammable, 

Содержание MHL-230

























Отзывы: